Mixed media jewelry is hot right now which means that these lovely necklaces and bracelets are sure to win you some compliments. We’re seeing chains with ribbons and threads woven through them all over the place, and I for one am a fan!
I initially stumbled across these beauties while perusing Studs and Pearls and instantly fell for them. I make plush monsters for my son in my spare time, so I have TONS of embroidery floss around, which made this a gem of a find for me.I’m not going to lie, making these can be a little tricky until you get the hang of it, but the outcome is well worth it.
The first example pictured is by Aurélie Bidermann and runs about $400. I’m going to offer up an equally attractive DIY with a MUCH smaller price tag.
What you’ll need:
A thick curb chain (these can easily be found at craft stores like AC Moore)
Embroidery thread (I use a total of 6 different colors, but you can play around with the amount of colors you choose to use)
A clasp if your necklace or bracelet doesn’t have one
Jump rings if you want to add charms
A bobby pin
Choose your colors (I usually do two sets of color schemes – 3 different similar colors for each set of strings) * I use a total of 30 strands – 15 for the first cluster and 15 for the second/ 5 of each different color*
Measure and cut the string so that it’s at least 3 times the length of your chain
Tie the two groupings of 15 strings together leaving about two inches at the end
Separate the two different groups of string and decide which you’d like to start with
Take the group you’ve decided to start with and put the bobby pin around it
Pull it under the first link in your chain using the bobby pin (trust me, it makes it A LOT easier)
Take the bobby pin and place it on the second group of strings
Pull the second group over top of the remaining string from the first and loop it behind the same link and pull it through
Repeat steps until chain is completely braided with thread then tie a knot in the end
***For steps with pictures check out Studs and Pearls***My directions are slightly different, but it’s basically the same thing.
If you want to add charms, simply attach them to the uncovered side of the chain using jump rings
Eventually when my camera stops being difficult, I’ll be uploading some pictures of the bracelets I’ve made using this technique. In the mean time, I hope you guys have fun with this project!